Connecting Wires to Terminals

AUX input (Stereo)

 

Use the mini-plug cable which is

Light Green (Parking sensor wire)

stereo type and does not have any

resistance.

PRK SW

 

 

Light Green

USB connector

(Extension cable: Accessory3)

For the sake of safety, be sure to connect the parking sensor.

⁄Connect to the vehicle’s parking brake detection

switch harness.

OUT

VIDEO

Front side

RL

Yellow (Visual output)

FM/AM antenna input

Rear output/ Sub Woofer output/ AV output (audio)

Fuse (10A)

 

Wiring harness

To Kenwood disc changer/ External optional accessory

(Accessory1)

 

⁄ To connect these leads, refer to the relevant instruction manuals.

White

 

White/Black

To front left speaker

Gray

 

Gray/Black

To front right speaker

Green

 

Green/Black

To rear left speaker

Purple

 

Purple/Black

To rear right speaker

If no connections are made, do not let the wire come out from the tab.

Blue/White

(Power control/ Antenna control wire)

P.CONT

Blue

(Antenna control wire)

ANT.

CONT

Brown

MUTE

Car fuse box

Red (Ignition wire)

ACC

Yellow (Battery wire)

Black (Ground wire) - (To car chassis)

Connect either to the power control terminal when using the optional power amplifier, or to the antenna control terminal in the vehicle.

Depending on what antenna you are using, connect either to the control terminal of the motor antenna, or to the power terminal for the booster amplifier of the film or short pole-type antenna.

Not used.

Ignition key switch

Car fuse box (Main fuse)

Battery

English 35