Audio Preset Memory

Registering the value setup by Sound Control.

1Setup Sound Control

Refer to the following operations to setup the Sound Control.

-Cabin selection (page 27)

-Speaker Setting (page 27)

-DTA (Digital Time Alignment) setting (page 28)

-X’Over setting (page 28)

-Preset Equalizer Select (page 25)

-Manual Equalizer Control (page 26)

-Position Control (page 26)

2Enter Audio Preset Memory mode (Other than Standby mode)Press [ ] 1 sec., and select “DSP” > “PRESET” > “MEMORY”.

Press the [AUD] knob for at least 1 second.

•For how to select Function Control items, refer to <Function Control> (page 10).

3Select the number to put in the memoryTurn the [AUD] knob to select number, and then press the [AUD] knob.

“USER1” – “USER6”

4Put the Audio Preset in the memoryTurn the [AUD] knob to select “YES”, and then press the [AUD] knob.

“COMPLETE” is displayed.

5Exit Function Control mode

Press the [ ] button for at least 1 second.

⁄

•Register 6 pairs of Audio Preset Memory.

•“USER1”: When you press the Reset, all the sources will be the setting value which is registered.

•“USER1”, “USER2”:

The memory cannot be erased by the Reset button.

•This function cannot be registered when the iPod Equalizer set in <Equalizer Control> (page 25).

Audio Preset Recall

Recalling the sound setup registered by <Audio Preset Memory> (page 29).

1Select the source Press the [SRC] button.

2Enter Audio Preset Recall modePress [ ] 1 sec., and select “DSP” > “PRESET”> “RECALL”.

Press the [AUD] knob for at least 1 second.

•For how to select Function Control items, refer to <Function Control> (page 10).

3Select the number to recall in the memory Turn the [AUD] knob to select number, and then press the [AUD] knob.

“USER1” – “USER6”

4Recall the Audio Preset

Turn the [AUD] knob to select “YES”, and then press the [AUD] knob.

“COMPLETE” is displayed.

5Exit Function Control mode

Press the [ ] button for at least 1 second.

⁄

•The User memory of <Preset Equalizer Select> (page 25) is changed to the value which was recalled.

•The source tone memory item of <Preset Equalizer Select> (page 25) is changed to the value which was recalled by the selected source.

English 29