Kenwood KIV-BT901 source, Display, Remarks, Overview, Make a setting, 5Make a setting, Initial Settings, Select the Standby, 1Select the Standby, Exit Menu List mode

Initial Settings

You can select following Initial Setting items.

1Select the Standby

Press the [SRC] button repeatedly also switches

source.

Select the “ STANDBY” display.

✍❜SRC Select mode 2: Press the [SRC] button. Turn the [Volume] knob and press it when the desired item is displayed.

2Enter Menu List mode Press the [MENU] button.

3Enter Initial Setting mode

Turn the [Volume] knob and press it when the desired item is displayed.

Select “Initial Settings”.

4Select the setting item to adjust

Turn the [Volume] knob and press it when the desired item is displayed.

Display		Overview
“Initial Settings”
	“Tuner Preset	You can select a preset type.
	Type” *1	“Type Normal”: Memorizes one station for each
		preset button in each band (FM/ AM/ SR1 –
		SR4/ XM1 – XM4).
		“Type Mixed”: Memorizes one station for each
		preset button regardless of the selected band
		(FM/ AM) and another Satellite Radio Tuner.
	“Source Select”	Sets the source selection method.
		“1”/ “2”
	“Beep”	Setting the operation check sound (beep sound)
		ON/OFF.
		“ON”/ “OFF”
	“Menu Language	You can select the display language for the
	Select”	Menu list item.
		“English”/ “Français”/ “Español”
	“Pandora Source”	When this is set to ON, Pandora source can be
		selected.
		“ON”: Allows you to select the Pandora source
		by connecting a Pandora-compliant iPhone.
		“OFF”: Disable Pandora source selection.
	“Built in AUX”	When this is set to ON, AUX source can be
		selected.
		“ON”: Allows AUX source to be selected. Use
		this setting when the built-in AUX terminal
		is connected to the external equipment all
		the time.
		“OFF”: Disable AUX source selection. Use this
		setting when the built-in AUX terminal is
		not used.

“Built in AMP”	Selecting “OFF” turns off the built-in amplifier.
	Turning off the built-in amplifier improves the
	quality of the sound from Preout.
	“ON”/ “OFF”
“AV Out Set”	Changes the iPod setting from AV Output to
	output-only terminal.
	“ON”/ “OFF”
“R-CAM	Sets a method to switch to the rear view camera
Interruption”	video display.
	“ON”: Switches to the rear view camera video
	display when engaging the shift knob of car
	to “Reverse”.
	“OFF”: Rear view camera is not used.
“R-CAM Mirror”	You can flip the left and right of the rear view
	camera video display. Set to “ON” and the rear
	view will be displayed left and right in mirror
	image on the screen.
	“ON”/ “OFF”
“System F/W	Updates the firmware. The update information
Update”	will be posted on the following URL as
	necessary.
	www.kenwood.com/cs/ce/

( : Factory setting)

*1 Not selectable when KTC-HR200 (optional accessory) is connected.

5Make a setting

Turn the [Volume] knob to select a setting value, and then press the [Volume] knob.

6Exit Menu List mode

Press the [MENU] button for at least 1 second, and then press it again briefly.

Remarks

• “AV Out Set”

Outputs video and audio from the iPod source. Those from the USB device cannot be output.

When the iPod source is switched to the Pandora source or Internal Memory source, the output from the AV Output terminal stops.

English 43