Kenwood KIV-BT901 Channel Scan, Preset Memory, Preset Tuning, 3Enter the channel, 3Start Channel Scan, Direct Access Tuning, Select “Channel Scan”, Select “List & Memory”

Cancelling Category and Channel Search mode Press the [MENU] button for at least 1 second, and then press it again briefly.

⁄

•You cannot Channel search until the category information is acquired.

Preset Memory

Putting the channel in the memory.

1Select the channel you wish to store in the preset memory

2Enter Menu List mode Press the [MENU] button.

3Enter Preset Memory mode

Turn the [Volume] knob and press it when the desired item is displayed.

Select “List & Memory”.

4Select the number to put in the memory

Turn the [Volume] knob and press it for at least 2 seconds when the desired item is displayed. Select the preset number.

⁄

•Only the channel number is stored. Category information is not stored.

•Up to six channels can be registered for each preset band. Selecting “Mixed” for “Tuner Preset Type” allows you to register up to six stations including FM, AM, and another Satellite Radio Tuner regardless of the selected source. See “Tuner Preset Type” of <Initial Settings> (page 43).

Preset Tuning

Recalling the channels in the memory.

1Select Satellite Radio source

2Enter Menu List mode Press the [MENU] button.

3Select a desired station in the memory

Turn the [Volume] knob and press it when the desired item is displayed.

Select “List & Memory” > Preset number.

Channel Scan

Every receivable Channel is checked for 10 seconds.

1Select Satellite Radio source

2Enter Menu List mode Press the [MENU] button.

3Start Channel Scan

Turn the [Volume] knob and press it when the desired item is displayed.

Select “Channel Scan”.4Release it when the channel you want to listen to is received

Press the [Volume] knob.

Function of remote control

Direct Access Tuning

Entering the channel and tuning.

1Select Satellite Radio source

2Enter Direct Access Tuning mode

Press the [DIRECT] button on the remote control.

3Enter the channelPress the number buttons.4Tune in to the entered channel Press the [4] or [¢] button.

Cancelling Direct Access Tuning

Press the [DIRECT] button on the remote control.

⁄

•If you make no button operation for 10 seconds, the Direct Access Tuning mode is automatically canceled.

•If you cannot receive any signal in the input Channel due to bad conditions on radio wave or other such problems, “Acquiring Signal”/ “No Signal” appears.

English 63