Manuals / Brands / Home Audio / Stereo Receiver / Kenwood / Home Audio / Stereo Receiver

Kenwood KIV-BT901 Removing the Hard Rubber Frame, CAUTION, ¤CAUTION, Japanese Cars, Non-JapaneseCars, Removing the Unit

1 88

Download 88 pages, 6.11 Mb

English

Removing the Hard Rubber Frame

1 Engage the catch pins on the removal tool and remove the two locks on the upper level.

Lift up and pull the frame forward as shown in the figure.

Lock

Catch

Accessory 2 Removal tool

2 When the upper level is removed, remove the lower two locations.

⁄

• The frame can be removed from the bottom side in the same manner.

Removing the Unit

1 Refer to the section <Removing the Hard Rubber Frame> and then remove the hard rubber frame.

2 Insert the two removal tools deeply into the slots on each side, as shown.

3 Lower the removal tool toward the bottom, and pull out the unit halfway while pressing towards the inside.

Accessory 2

¤

• Be careful to avoid injury from the catch pins on the removal tool.

4 Pull the unit all the way out with your hands, being careful not to drop it.

Installation/Removing the Unit

Non-Japanese Cars

Bend the tabs of the mounting sleeve with a screwdriver or similar tool and attach it in place.

⁄

•Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip).

Japanese Cars

1Refer to the section <Removing the Hard Rubber Frame> and then remove the hard rubber frame.

2Align the holes in the unit (two locations on each side) with the vehicle mounting bracket and secure the unit with the accessory screws.

T		N
N	T	T/N
N	T

T: Toyota cars

N: Nissan cars

		8 mm	8mm
		MAX.	8mm
		MAX.	MAX.
			MAX.
	5		6
			6
ø5mm			ø5mm

Accessory 5...for Nissan car

Accessory 6...for Toyota car

¤CAUTION

Install this unit in the console of your vehicle.

Do not touch the metal part of this unit during and shortly after the use of the unit. Metal part such as the heat sink and enclosure become hot.

81

Contents

For your records Register Online www.Kenwoodusa.com Before Use Bluetooth Audio Operation Component Names and Functions Operation of Hands-Free 2WARNING To prevent injury or fire, take the following precautions: Do not use this unit before canceling Demonstration mode How to reset your unit Notes 1[MENU] button 2[DISP] button 3[Volume] knob 4[SEARCH MODE] button 5Microphone (KIV-BT901) Exit of the Demonstration Mode Power and Source Select Volume Menu List Operation 1Select the source SRC MENU Volume DISP SEARCH MODE 4 38 ¢ SCRL KIV-701 iPod Playing iPod • Connect an iPod • Select iPod source Selecting a Song by Browsing iPod Items 1Select iPod source Press the [SRC] button repeatedly also switches source Enter Play Mode in the Menu List 1 second KIV-701: 1.Press the [MENU] button Select “Play Mode” 5Make a setting 6Exit Menu List mode Selecting the Search Mode Search mode in Normal playing Search mode in Browsing Direct Search 3Enter Direct Search mode Select “Direct Search” 4Select the browse item Turn the [Volume] knob and press it when the desired browse item is selected Alphabet Search Select “Music” or “Videos” > category > brows item Select “Alphabet Search” 4Search for item Cancelling the Alphabet Search My Playlist Registering Songs in the Playlist 1Play the song you want to register 2Press the [SEARCH MODE] button 3Register the song Page SRC MENU Volume DISP SCRL Listening to PANDORA® internet radio • Connect an iPhone • Select Pandora source 4Select a station Bookmark Registration 4Exit Menu List mode Search and New Station Registration Select “New Stations” Playing USB device • Connect a USB device Moving to the next folder (Except for Music Editor media or Zune) Remove USB device Multi card reader Drive Search File Search USB device/ Internal memory source Music Editor media DisplayItems Zune 1Select USB or Zune source Select “Music” > item 1Enter Direct Music Search mode Press the [DIRECT] button on the remote control 2Enter the music number Press the number buttons on the remote control 3Search the music Copying from USB device 3Enter Copy mode Select “Copy from USB” 4Select a file or folder to copy 5Determine the selected file or folder Deleting Files in Memory Internal Memory Format 1Select Internal memory source 3Enter Internal memory Format mode Select “YES” To select a file Press the Slide show Enter Menu List mode Press the [MENU] button Press the [MENU] button for at least 1 second to move to the first hierarchy Page Select CD changer source Moving to the next disc 1Select CD changer source Direct Disc Search 1Enter Direct Disc Search mode 2Enter the disc number 3Search the disc Press the [FM+] or [AM–]button Selecting Tuner source Selecting the Receiving Band Select “FM” or “AM” Selecting the Receiving station Tuner Setting 3Enter Preset Memory mode Select “List & Memory” 4Select the number to put in the memory 1Select the radio band you wish to store in the preset memory 3Enter Auto Memory Entry mode 2Enter Direct Access Tuning mode 3Enter the frequency Press button 4Tune in to the entered frequency Press the [4] or [¢] button Cancelling Direct Access Tuning PTY (Program Type) Program Type Preset Program Type Display Presetting the Program Type 3Select the number to put in the memory SRC MENU Volume 1Select the Standby 3Enter Rear view camera setting mode Select “Initial Settings” > “R-CAMInterruption” Rear view camera SRC Volume DISP Connecting a Bluetooth Device 1Turn on this unit Press the [SRC] button 2Start registering this unit by operating the Bluetooth device 3Enter a PIN code iPod 1Enter easy pairing mode Press the [] button for at least 1 second 3Select a cell-phonename 4Input the PIN code Receiving a Call Answering a Phone Call Rejecting an Incoming Call KIV-BT901:Press the [SRC] or [] button KIV-701:Press the [SRC] or [iPod] button Making a Call 1Enter Bluetooth mode KIV-BT901:Press the [] button KIV-701:Press the [iPod] button for at least 1 second 2Select a dialing method Dial a Number 2Select the number dial mode Select “Number Dial” 3Enter a phone number Press the number ([1] – [0]), #([FM]), *([AM]), or + Registering to the Preset Dial Number List Display of Phone Number Type (category) Page Text scroll Display Setting Press the [DISP] button Mode Display Type Illumination Color Selection Select “Settings” > “Display & Illumination” > “Key Color Select” 3Select the Illumination Color Creating “User” color Select the color to adjust. (red, green, or blue) Customization of Display 1 Select the source Text Display Selection Enter Display Setting mode and Select the Information Display Auxiliary Input Display Setting 1Select the AUX source Select “Settings” > “Name Set” 4Select the Auxiliary input display Turn the [Volume] knob Clock and Date Adjustment 2Select Radio Data System’s automatic time adjustment Select “Settings” > “Clock & Date” > “Time Synchronized” > “ON” or “OFF” 3Enter Clock adjustment mode Select “Clock Adjust” Initial Settings 3Enter Initial Setting mode Select “Initial Settings” Demonstration Mode Setting 2Enter Demonstration mode setting Select “DEMO Mode” 3Set the Demonstration mode Select “ON” or “OFF” Page Audio Control 2Enter Audio Control mode Press the [Volume] knob 3Select the setting item to adjust 5Exit Audio Control mode Preset Equalizer Curve Select Equalizer curve 3Enter Preset Equalizer mode Select “Equalizer” > “Preset Equalizer” 4Select the Equalizer curve Listening Position Selection Compensation seat 3Enter Preset position setting mode Select “Position” > “Preset Position” Listening Position Fine Adjustments Dual Zone System Select “Detailed Setup” Car Type Selection 3Enter Car Type select mode Select “Detailed Setup” > “Car Type” 4Select the car type Speaker Setting Car Type Fine Adjustments 3Enter Car Type Adjustment mode X’Over Setting 3Enter X’Over setting mode Select “Detailed Setup” > “X’Over” 4Select the speaker you want to set Select “Front”, “Rear”, or “SubWoofer” Audio Preset Recall Press the [SRC] button repeatedly also switches 2Enter Audio preset recall mode Select “Detailed Setup” > “Preset” > “Preset Recall” Easy pairing function When registering a cell-phonefor the first time (Registering a cell-phone) 2“(cell-phonename)” or “Device Full” is displayed 3Select a cell-phonename Turn the [Volume] knob 4Set up the cell-phonename 5Exit BT Setting mode 6Exit Bluetooth mode Registering Bluetooth Device (Pairing) Registering from Bluetooth devices 5Input the PIN code 6Transmit the PIN code 8Exit BT Setting mode Registering PIN Code 2Enter PIN code edit mode Select “BT Settings” > “Detailed Setup” > “PIN Code Edit” 3Input the PIN code 4Register a PIN code Deleting a Registered Bluetooth Device 2Enter Bluetooth device deletion mode Select “BT Settings” > “Pairing” > “Device Delete” 4Delete the selected Bluetooth device Press the [Volume] knob 6Exit BT Setting mode Adding a Voice Dialing Command 2Enter Phone book name edit mode Select “BT Settings” > “Voice Tag” > “Phonebook Name Edit” 3Search for the name to register 4Select a mode Setting a Voice Command for Category 2Enter Phone Number type edit mode Select “BT Settings” > “Voice Tag” > “Phonebook Type Edit” Select “General”, “Home”, “Office”, “Mobile”, or “Other” MENU Volume DISP Downloading the SMS 2Enter SMS download mode Select “BT Settings” > “SMS Download” 3Start downloading Press the [Volume] knob. “SMS Downloading” is displayed Selecting Satellite Radio source Selecting the channel Selecting the Preset Band Satellite Radio Setting 1Select Satellite Radio source Preset Memory 1Select the channel you wish to store in the preset memory 3Select a desired station in the memory Channel Scan 3Start Channel Scan Selecting HD Radio source Select “FM1”, “FM2”, “FM3” or “AM” Selecting the Receiving station or channel Press the [4] or [¢] button HD Radio™ Setting 1Select the HD Radio source 2Enter Direct Access Tuning mode Press the [DIRECT] button 3Select Tuning item Enter the frequency or channel Press the number buttons Desired frequency 5Tune in to the entered frequency or channel Press the [4] or [¢] button Page General control In Tuner source In USB/ Internal Memory source In iPod source In Satellite Radio tuner source Changing the battery of the remote control unit ¤CAUTION About Audio file About Picture files iPod/iPhone that can be connected to this unit About Video files About PANDORA® internet radio About USB device About USB hub About “KENWOOD Music Editor” About the Cell-Phone About Satellite Radio tuner (Optional) About HD Radio Reception (Optional) Menu List Function items appearing when the iPod source is selected Function items appearing when the Pandora source is selected Function items appearing when the USB source is selected Function items appearing when the Music Editor media source is selected Function items appearing when the Zune source is selected Function items appearing when the Internal memory source is selected Function items appearing when the Disc changer source is selected Function items appearing when the Tuner source is selected Function items appearing when an AUX source is selected Function items appearing when the Hands-Freesource is selected Function items appearing when the Bluetooth Audio source is selected Function items appearing when the Satellite Radio tuner source is selected Function items appearing when the HD Radio™ tuner source is selected Display Indicator items Time zone list Page FCC WARNING FCC NOTE IC (Industry Canada) Notice 2CAUTION CALIFORNIA, USA ONLY For Good Reception Page Removing the Hard Rubber Frame Troubleshooting Guide Installation the Microphone Unit General Tuner source Audio file source Hands-free Bluetooth audio source The messages shown below display your systems condition Bluetooth Pandora FM tuner section AM tuner section Bluetooth section (KIV-BT901) USB Interface Monitor section Audio/ Video section Auxiliary input Rear view camera input