Kenwood Music Keg manual Making the Final Connection

4.Secure the Music Keg to the mounting location with the four included self-tapping screws. Make sure the Music Keg is mounted such that the connector cable will reach with ample room. The Music Keg should be mounted to a hard stable surface, such as particle board or sheet metal.

5. Proceed to the section “Making the Final Connection”.

Making the Final Connection

1.With the DMS cartridge fully inserted, plug the cable into the back of the Music Keg.

2.You should see the red and green lights turn on.

3.3. About 5 seconds later, both lights should turn off and stay off.

4.Turn on your car stereo.

5.Switch to CD changer mode on your head unit.

6.Wait for a “Welcome to the Kenwood Music Keg Car Audio System” message to play. You may have to wait up to 15

Page 15

Kenwood Excelon Music Keg User Manual

Copyright 2001 Kenwood USA Corporation & PhatNoise Inc.