EMERGENCY CALLS
If your transceiver has been programmed with the Emergency function, you can make emergency calls.
Note: Only the Auxiliary (orange) key can be programmed with the Emergency function.
1Press and hold the key programmed as Emergency.
ïDepending on the delay time programmed into your transceiver, the length of time you must hold the Emergency key will vary.
ïWhen the transceiver enters Emergency mode, the transceiver will change to the Emergency channel and begin transmitting based on how the transceiver is set up by your dealer. Transmit periods are also set by your dealer.
2To exit Emergency mode, press and hold the Emergency key again.
ïIf the Emergency mode completes the preset number of cycles, Emergency mode will automatically end and the transceiver will return to the channel that was in use before Emergency mode was entered.
Note:
◆Your dealer can set the transceiver to emit a tone when Emergency mode starts and stops
◆Your dealer can set the transceiver to emit tones and received signals as normal or mute the speaker during Emergency operation.
36