DTMF (DUAL TONE MULTI FREQUENCY) CALLS

MANUAL DIALING (KEYPAD MODELS ONLY)

■METHOD 1

Press and hold the PTT switch, then enter the desired digits using the front panel keypad.

ïIf your dealer has activated the Keypad Auto PTT function, you need not press the PTT switch while pressing the keys on the keypad in Conventional systems. The DTMF code will be sent automatically when you press a key.

■METHOD 2

Enter the desired digits using the front panel keypad (maximum of 16 digits). After entering the complete number, press the PTT switch.

ïIn Conventional systems, the DTMF code is transmitted after pressing the PTT switch.

ïIn Trunking systems, the DTMF code is transmitted after a connection is established. Releasing the PTT switch before a connection is established will stop the transmission from occurring.

ïIn RIC (Repeater Inter-Connect) Trunking systems, the DTMF code is transmitted after a connection with the telephone system is established. Press the key programmed as Autodial, followed by the Side 2 key, to automatically connect to the repeater and transmit the DTMF code.

Note: If you switch the power OFF before sending the number, the number will be cleared from memory.

31