SCAN

If the Scan function is programmed, zones or channels can be scanned by pressing the key programmed as Scan. Scan can be used as either Single Scan, Multi Scan, or List Scan (TK-3173 only).

ïSingle Scan monitors only the channels of the currently selected zone, which have been added to the scanning sequence. If set up to scan the Priority channel, the Priority channel will be scanned even if it is not within the currently selected zone.

ïMulti Scan monitors all channels of every zone, which have been added to the scanning sequence.

ïList Scan monitors all channels within the specified range of zones, which have been added to the scanning sequence. If set up to scan the Priority channel, the Priority channel will be scanned even if it is not within any of the zones in the list.

To activate Scan, press the key programmed as Scan.

ïThe icon and ìî or the revert zone and channel/ group ID number appear on the display.

ïThe zone add indicator () will appear on the display when the selected zone is added to the scan sequence. The

channel/ group ID add indicator () will appear on the display when the selected channel/ group ID is added to the scan sequence.

ïWhen a call is received, scanning stops and the zone and channel/ group ID digits appear. Press the PTT switch and speak into the microphone to respond to the call. The transceiver will continue scanning after a predetermined time delay if the PTT switch is released and no further signal is received.

To stop scanning, press the Scan key again.

24