CONNECT/ DISCONNECT IDS (KEYPAD MODELS ONLY)

1Press the # key or the key programmed as Autodial.

ïThe first entry in the Autodial list appears on the display.

2 Connect ID: Press the key two times.

Disconnect ID: Press the key followed by the # key.

3 Press the PTT switch to make the call or the Side 2 key to page the selected recipient.

DTMF SIGNALING

DTMF Signaling is either enabled or disabled by your dealer. This function opens the squelch only when the transceiver receives the DTMF code programmed in your transceiver. Each transceiver is normally programmed with a unique code. You will not hear calls from transceivers that are not programmed with a matching code.

When you receive a signal containing the correct tones, squelch opens and you will hear the call.

ïThe indicator appears on the display. (This indicator will not appear on TK-3173 transceivers if it has been set to store Trunking zone data.)

ïThe LED indicator flashes orange.

ïTo mute the speaker after squelch opens, press the key programmed as Monitor.

ïYour dealer can program the squelch to close again after a specific time period elapses.

ïIf Transpond for DTMF Signaling is programmed, an acknowledgment signal is returned to the calling station.

ïIf Tone Alert for DTMF Signaling is programmed, an alert tone will sound when the correct tones are received.

STUN

This function is used when a transceiver is stolen or lost. When the transceiver receives a call containing a stun code, either transmit mode will be disabled, or both receive mode and transmit mode will be disabled. Stun is cancelled when the transceiver receives a call with a revive code.

35