Kenwood TS-2000, TS-2000X, TS-B2000 manual 143

21 APPENDIX

RT	Sets or reads the RIT function status.												Parameters:
													P1
													0: RIT function OFF
	1	2	3	4	5		6		7	8	9	10
													1: RIT function ON
Set	R	T	P1	;
	1	2	3	4	5		6		7	8	9	10
Read	R	T	;
	1	2	3	4	5		6		7	8	9	10
Answer
	R	T	P1	;
RU	Moves the RIT offset frequency up.												Parameters:
	Speed up the scan speed in Scan mode.												P1
													00000 ~ 99999 (the offset frequency in Hz)
	1	2	3	4	5		6		7	8	9	10
													P2
Set
	R	U
			P1	P1	P1		P1		P1	;			1 ~ 9: Scan speed
													When Scan is OFF:
	1	2	3	4	5		6		7	8	9	10
													If no parameter is specified, the frequency goes 1 step up.
Read
	R	U	;										When Scan is ON:
													RU; to read the current scan speed.
	1	2	3	4	5		6		7	8	9	10	RUnnnnn; (nnnnn = Any number) to speed the scan speed
Answer	R	U	P2	;									1 step up.
RX	Sets the receiver function status.												Parameters:
													P1
													0: Main transceiver
	1	2	3	4	5		6		7	8	9	10
													1: Sub-receiver
Set	R	X	;
	1	2	3	4	5		6		7	8	9	10
Read
	1	2	3	4	5		6		7	8	9	10
Answer
	R	X	P1	;
SA	Sets or reads the Satellite mode status.												Parameters:
													P1
													0: Satellite mode OFF
													1: Satellite mode ON
	1	2	3	4	5		6		7	8	9	10
													P2
Set													0 ~ 9: Satellite Memory Channel number
	S	A											P3
			P1	P2	P3	P4		P5		P6	P7	;
													0: Main transceiver (uplink)/ Sub-receiver (downlink)
													1: Main transceiver (downlink)/ Sub-receiver (uplink)
	1	2	3	4	5		6		7	8	9	10
													P4
Read													0: CTRL is on the main transceiver
	S	A											1: CTRL is on the sub-receiver
			;
													P5
													0: TRACE OFF, 1: TRACE OFF
	1	2	3	4	5		6		7	8	9	10	P6
													0: TRACE REV. OFF, 1: TRACE REV ON
	S	A	P1	P2	P3		P4		P5	P6	P7	P8	P7
													0: MULTI/ CH control (VFO mode)
Answer													1: MULTI/ CH control (Memory channel)
	11	12	13	14	15		16		17	18	19	20	P8
													Satellite Channel name (8 characters)
	P8	P8	P8	P8	P8		P8		P8	;			Use the FA (downlink) or FB (uplink) command to change the
													frequencies.

135