How Do I Adjust the Surround Modes?

Switching Input Modes

To fully enjoy the sonic benefits of specially-encoded DVD AUDIO discs played on a compatible DVD player, you must set the receiver’s input to 6Ch Input.

When you are finished listening to analog media, set the receiver’s input back to Full Auto.

1.Press the F.SHIFT = LISTEN M. (INPUT MODE)* button on Re- mote Control unit.

 

/8

 

Input Status

1

 

 

1

Dolby

 

/

7

 

1

2

 

3

Digital

4

5

 

6

F.Auto

7

8

 

9

 

+10

0

 

+100

 

10

11

 

12

 

2. Repeat step 1 until the desired input mode is displayed.

Operation on the receiver:

1.Press the INPUT MODE button inside the door repeatedly until FULL AUTO, DIGITAL MANUAL, ANALOG or 6CH INPUT is displayed.

•If you turn off the receiver, select a different source device, the “Digi- tal manual” is reset to “Full Auto”.

•When you use “Full Auto” mode with certain DVD and LD players, performing operations such as “Skip” or “Stop” may momentarily interrupt the output.

*When an operation is described as [F.SHIFT = LISTEN M. (INPUT MODE) button], for example, press the F.SHIFT button and press the next button (the LISTEN M. (INPUT MODE) button in this case) within

8 seconds.

Receiver Using

23