How Do I Operate Devices?
Recording
To record audio/video:
1.Select the recording input source device such as a AV device or tuner (see page 35).
2.Use Remote Control unit to select the channel and perform other required operations in the same way as with the remote of the se- lected AV device.
3.Press and hold the remote’s CONFIRM/SHIFT button for about 2 seconds so that the Shift display appears, then select the recording device such as the VCR. For 8 seconds after the CONFIRM/SHIFT but- ton is pressed, the input selection signal is not transmitted from the remote to the receiver even when an input is selected. Therefore, this period can be used to remote control the recording device without changing the input selection.
4.Press the remote’s REC button to start recording.
For detailed operating procedures of your AV device, refer to its instruction manual.
To record a source connected through [SL 16] system control cord:
When recording audio from a CD player connected through a system control cord, the sync recording is available. (For the sync or synchro recording, refer to the instruction manual of your cassette deck or MD recorder.)
1.Select the CD input on Remote Control unit.
2.Put the cassette deck or MD recorder in Rec pause mode. When the CD starts to be played, recording is automatically started in synchro- nism.
Receiver Using
47