How Do I Adjust the Surround Modes?

Description of Dolby Pro Logic II: Music mode

Panorama mode : Expands the image of front-channel stereo to the surround speakers to create a sound environment that fills your surroundings.

Dimension : This controls the balance between the Front and Rear in 3 steps on the front and 3 steps on the rear. Set this parameter to one of the Front steps if the surround effect is too strong, or to one of the Back steps if it is too weak.

Center Width : The center channel signal can be divided and distributed to the Front L/R channels.

The adjustment for distributing the center channel signal to the front channels can be applied in eight steps from 0 to 7.

Use this adjustment when the center image seems to be too strong.

Selecting the parameter of Pro Logic II : Music mode

1Press the LISTEN M. button on the Remote Control unit repeatedly until the PL II : Music mode to be set is displayed.

2.Press the SOUND button until “Panorama Off” (or “On”) is dis- played on Remote Control unit.

 

/8

 

Sound

1

 

 

1

Panorama

 

/

7

 

1

2

 

3

Off

4

5

 

6

Home Next

7

8

 

9

 

+10

0

 

+100

 

10

11

 

12

 

3. Press the LCD cursor up/down (/) button on Remote Control unit to select “Panorama On” (or “Off”), then press the Next button.

4.Press the SOUND button to “Dimension 0” (or “F-1” etc.) is dis- played on Remote Control unit.

5. Press the LCD cursor up/down (/) button on Remote Control unit to select “Dimension F-1” (or “F-2”, “F-3”, “R-1” to “R-3”), then press the Next button.

Receiver Using

29