How Do I Operate Devices?

Operating a CD player

Kenwood 200-Disc CD Changer

Kenwood 200-Disc CD Changers have many different features that make them ideal complements to your Kenwood receiver. Some changer models can store disc and track titles for all loaded discs, and then download this information to your Remote Control unit.

To play Kenwood 200-Disc CD Changer:

1.Select the CD input (see page 35).

2.Use Remote Control unit to perform same remote control operations as with the remote of the CD changer.

You have to assign disc and track titles to the discs in your CD player before you can transfer them to Remote Control unit. See your CD player’s instruction manual for more information about assigning disc and track titles.

To read the loaded disc titles and store them in Remote Control unit:

1.Select the CD input and display “Menu”.

2.Press the Menu button (LCD function button 2).

3.Select “All Data Read” and press the Enter button (LCD function but- ton 2).

4.Set Remote Control unit down so that its IR transmitter window is aiming at receiver’s IR transmitter window. Select Disc Title or Track Title. Do not move Remote Control unit while it is reading data.

This process may take some time, depending on how many CDs you have loaded. When the IR light on the receiver goes out, the receiver is done sending the information to Remote Control unit, and you may move Remote Control unit again.

Remote Control unit’s memory now contains the disc titles of every CD in the changer with title information.

Receiver Using

39