![](/images/new-backgrounds/1086439/8643917x1.webp)
Allow a 2” minimum clearance between the bottom of the metal pan of the cook top and any combustible surface located below, ie: the upper edge of a drawer installed below the cook top (see Fig. B on previous page). Failure to provide proper clearances and ventilation may result in a fire hazard.
Cook top dimensions and countertop cutout dimensions for each model are shown below:
14 1/4" | 23 1/4" |
|
2 5/8"
12 1/4"
21 3/4"
Model : MED2 & ALP2LG
12" | 12 1/2" |
2 5/8"
11 1/2" | 10 1/4" |
12"
21"
2 5/8"
20" 10 3/4"
Models: MED2TL , CAR2, ALP2SM
Note:
When making countertop, radius the corner of the cutout (1/4” radius is typical). This will prevent cracking of the countertop. Follow the countertop manufacturer’s instructions regarding the minimum corner radius and reinforcement of corners.
Models: MED1 & CAR1 & ALP1
4