Belt and Running Deck

Running Belt

The running belt supplied with each treadmill is of the highest quality, offering superior traction and low noise under extreme conditions. It is therefore important to maintain each running belt periodically by observing that no cuts have appeared over time, and that the running belt has not shifted to one side of the deck surface. If the running belt constantly tracks (or moves) to one side of the deck, you must adjust the alignment bolts placed at the rear of the running belt.

See Belt Alignment for complete procedure.

Deck Surface

The running deck needs to remain free of any loose items that may become trapped between the running belt and the rollers. Avoid dropping liquids on the deck as this may cause the impregnated wax to gum up and collect at the rollers.

Under extreme conditions resulting in heavy wear and tear on the deck surface, it may be necessary to remove the deck and turn it over, or turn it back-to-front to expose a fresh coat of wax. The deck is specially designed to offer four reversible sides that have new or reduced wax surface wear.

Please contact your Bodyguard® Dealer for servicing the deck.

Make certain to have the power off before doing any maintenance.

2 1

figure 10

1 - Breaker

2 - ON/OFF switch

figure 11 Motor in treadmill for International models

6

5

3

2

1

 

4

 

 

Motor in treadmill for American models

Drive motor with connection wires.

1 - Speed sensor cable

2 - Computer power cable

3 - Computer DATA cable

4 - Elevation motor cable

5 - Power AC cable

6 - Motor cable

6

5

4

1 3 2

28

Page 28
Image 28
Keys Fitness T260, T240 owner manual Belt and Running Deck Running Belt, Deck Surface