Important Safety Instructions
This printer has been carefully designed to provide many years of safe, reliable performance. As with all types of electrical equipment, however, there are a few basic precautions you should take to avoid hurting yourself or damaging the device:
•Always ensure that the printer is connected to a UL rated surge protector
•Read and follow all warning instruction labels on the printer
•Place the printer on a flat, firm, solid surface
•To protect your printer from overheating, make sure all openings on the printer are not blocked
•Do not place the printer on or near a heat source
•Do not use your printer near water, or spill liquid into it
•Be certain that your power source matches the rating listed on your printer
•Do not place the power cord where it will be walked on. If the power cord becomes damaged or frayed replace it immediately.
•Do not insert anything into the ventilation slots or openings on the printer
•Only qualified, trained service technicians should attempt printer repair
B. Loading the Label Media
Load label media into the printer as follows:
•Open the media cover and lower the Media Hub Guide and Media Guide.
•Press in on the Printhead Latch and raise the Printhead Assembly.
1.Printhead Latch
2.Media Guide
3.Media Hub Guide
TimeMed Labeling Systems, Inc. - Call Toll Free:
