Kingston Technology KNE16TP/RS manual Appendix D Mounting Templates, Rubber Feet for Desktops

Appendix D Mounting Templates 21

Appendix D Mounting Templates

The EtheRx hubs can be stationed on a flat surface using the four rubber feet provided, or mounted to a standard 19-inch rack by using the mounting brackets on each side of the unit.

Rubber Feet for Desktops

The EtheRx hubs may use rubber feet applied to the bottom of the unit for desktop surfaces or stacking hubs on top of one another. The four (4) rubber feet have peel-off adhesive backing. Remove the backing and attach the feet to the bottom of the hub.

Brackets for Rack Mounting

The EtheRx hubs can also be mounted to a standard 19-inch rack by attaching the angle brackets to each side of the hub. Align the holes in the brackets with the side mount holes on the hub. Use the 8 bracket screws provided to attach the brackets. When the hub is placed into a 19-inch rack, use the 4 large knob rack mount screws to secure the hub to the rack. See Figure D-1 below:

Fig. D-1-Attaching the Mounting Brackets

KNE24TP/RS User’s Guide - Rev. A01 Kingston Technology Company