6 | Hardware Installation |
2.For PS/2 style keyboards, you will attach the DC power cable as shown below. First, unplug the keyboard from your computer’s rear panel. Plug the “AT to PS/2 adapter” directly into the keyboard connector on your computer’s rear panel. Next, plug the end of the power adapter cable with AT connector into the “AT to PS/2 adapter” extending from the computer’s rear panel. The opposite end of the adapter cable with the PS/2 connector is where you must now plug in your keyboard.
Note: When power is applied, the LED on the SSFDC™ Card Reader will remain constantly lit. When a PC storage card is inserted or accessed the LED will blink.
PS/2 Connector 
PS/2 Keyboard
Configuration
Plugs into the Cable extending from your PS/2 Keyboard
PS/2 to AT
Keyboard Adapter
PS/2 Keyboard Connection
Kingston Technology Company | SSFDC™ Card Reader - Rev. A00 |
