Kingston Technology PCREAD/SSFDC manual Parallel Port Conflict Window 95/98

Appendix A Troubleshooting 13

Parallel Port Conflict Window 95/98

If your Kingston SSFDC™ Card Reader cannot be installed under Windows 95/98:

1.and your LPT port address is 3BC.

Refer to your motherboard instructions, or added-on IO card instructions to change the LPT port address to 278 using IRQ 5, or 378 using IRQ 7. If other LPT port options exist, try using one of the other options.

2.If the Windows Device Manager indicates an IRQ assignment has a conflict after a Plug and Play Windows 95/98 or no IRQ is assigned (This may happen if some Windows 95/98 incompatible device is included inside the system), try:

Go to Device Manager in Windows 95/98 and try to change the parallel port assignment to IRQ 5 using port address 378 or IRQ 7 using port address 278.

SSFDC™ Card Reader - Rev. A00 Kingston Technology Company