KitchenAid 5KTT890 manual Using the Artisan Toasters, English, Checking the Toaster Progress

Using the Artisan™ Toasters

5.Push the lift lever down until the bread is lowered as far as possible, then turn the “O/I” Switch momentarily to the “I” position. The switch will spring back to the middle position and the function light will glow, indicating the toasting cycle has started.

NOTE: Toaster will automatically shut off if the “O/I” Switch is held in the “I” position more than 15 seconds.

6.When the toasting cycle is complete, a tone will sound and the function light will stop glowing. The toast will remain in the warm toasting cavity until the lift lever is raised.

English

Checking the Toaster Progress:

To check the progress of your toast during a toasting cycle, raise the manual lift lever. Raising the lift lever will not cancel the toasting cycle, enabling you to simply lower the bread if additional browning is required. If you remove the bread before a toasting cycle is complete, don’t forget to cancel the cycle by turning the “O/I” Switch momentarily to the “O” position. If you forget to cancel the cycle, the toaster will automatically shut off at the end of the cycle time.

NOTE: Operating the toaster without bread will not harm the toaster.

Canceling the Toaster Cycle:

To cancel the toasting cycle at anytime, turn the “O/I” Switch momentarily to the “O” position. The function light will stop glowing and the toasting cycle will end.

7