Fruit/Vegetable Strainer Attachment

NOTE: To avoid damage to the fruit/vegetable strainer attachment and/or mixer, Labruscan or slip-skin type grapes such as Concord, Catawba and Ontario grapes should not be processed in the Fruit/Vegetable Strainer. Only Ninifera family grapes such as Tokay and Thompson Seedless may be processed.

To Clean Fruit/Vegetable Strainer Attachment

First completely disassemble fruit/vegetable strainer attachment.

The following parts are dishwasher safe:

Grinder body

Grinder worm

Strainer cone

Strainer tray

Splash shield

Ring

Combination food pusher/wrench

The following parts should be hand washed in warm, sudsy water and dried thoroughly:

• Spring and shaft assembly

Some foods may stain certain parts. These stains may be removed by using one of the following methods: (1) place dishwasher safe parts in dishwasher and use cycle for normally soiled dishes, or (2) rub a small amount of oil or shortening over the stains, wash in warm, sudsy water and rinse. A small bottle brush can be used to help remove pulp from the strainer cone.

To Loosen Ring – If ring is too tight to remove by hand, slip the combination food pusher/wrench over the grooves and turn counterclockwise.

NOTE: To avoid damage to the fruit/ vegetable strainer attachment, do not use combination food pusher/wrench to tighten ring to grinder body.

Fruit/Vegetable Strainer Parts (Model FVSP) are available to convert a Model FGA Food Grinder to a Fruit/Vegetable Strainer.

ENGLISH

7

Page 9
Image 9
KitchenAid Food Processor, 9709647B, 161 manual To Clean Fruit/Vegetable Strainer Attachment