HELIX DN9848E Remote Control Software
User Guide
11
3 At the Add Multiple DN9848 E Devices
window, use the Number of Devices to
Add drop down list to select the
number of devices, you wish to add,
up to a maximum 16. For example, 9.
4 Click OK to add the devices.
A DN9848 Units Home screen (diagram right) is
opened inside the ELGAR Library Manager. The
HELIX DN9848E RCS units are automatically
inserted in FastNav® (highlighted by orange box)
and numbered sequentially from 1 upwards. The
highest numbered unit is selected.
The DN9848 Units Home screen is the workspace
where you remotely program scene EQ settings for
your HELIX DN9848E system controllers; see
section 3.4.3 for details.
To use the HELIX DN9848E RCS to control a
processing system, see section 11 for details on
Ethernet connection, setting up, configuration etc.,
and section 3.5 for online operation.
To add more HELIX DN9848E RCS devices to the ELGAR Library Manager
1 From the ELGAR main menu bar, select Tools > Add Device > DN9848 E.
2 In the Add Multiple DN9848 E Devices window, select the number of devices you wish to add using
the Number of Devices to Add drop down list; this will show only the number of available
devices left to add.
3 Click OK. These devices are added to the device list (left-hand side of screen), wi th each
new device being allocated the lowest available number. To cancel, click at the top
right-hand corner of window.
Note
Devices can be added/removed, as required, at any time during HELIX DN9848E RCS
operation.