HELIX DN9848E Remote Control Software User Guide
40
5 OUTPUT CHANNELS Please refer to the “Output Channels” section of the HELIX DN9848E Operators Manual for a brief
technical overview.
5.1 Output Channel Control Panel
Each of the eight output channels has a control panel on the DN9848E Units Home screen, as shown below.
To access the output control panels
The control panels for each output are located on DN9848E Units Home screen, as shown in
section 3.4.3 on page 25. To access this screen, click on button in
FastNav® or click on .
Delay control knob:
adjusts the delay
PEQ button: takes
you to the PEQ
screen Dyn. button: takes you to
the Dyn. (dynamics)
screen
Gain control knob: adjusts the
gain in decibels
Phase button: inverts
the output signal
Mute button: mutes
output channel
Output channel
name
Meter: monitors
internal signal
clipping and output
levels that may
cause damage to
loudspeaker
equipment
Filters button: takes you
to the Filters screen