HELIX DN9848E Remote Control Software
User Guide
65
To copy a unit’s input channel to input channels of selected units
1 Click and then, if necessary, , to obtain the Copy Input
Channels screen.
2 Click in the Source Unit field and select the
unit you wish to copy the input channel
from, using the drop down list. For
example, “02 KLARK TEKNIK DN9848 E”.
3 Click in the Source Channel field and select
the input channel of the source unit you
wish to copy, using the drop down list.
For example, “Input C”.
4 From the Copy Options section, select the elements of the
channel you wish to copy by clicking in the circle next to your
required option. For example, Gain and Delay in the diagram
right.
5 Under Destination Unit(s):, select the unit(s)
that you wish to copy the input channel
to by placing a tick in adjacent box. For
example, “03 KLARK TEKNIK
DN9848 E”. To select all units, click on
. To deselect all selected
units, click on .
6 Under Destination Channel(s), select the input channel(s) that you
wish to copy the selection into. For example, “Input D”. To
select all channels, click on . To deselect all
selected channels, click on .
7 When you are satisfied that your selections are correct, click .