Klark Teknik HELIX DN9848E 5.3 Setting Output Parameters ,

HELIX DN9848E Remote Control Software

User Guide

42

5.3 Setting Output Parameters

Signal processing for each output channel is programmed independently via its associated control panel.

The signal processing parameters are described below.

5.3.1 Naming an Output Channel

Channel names are shown in the top left-hand corner of the channel control panels (see section 5.1 on

page 40). The default names are “Output 1”, “Output 2” etc. Each name, which is up to eight

characters in length, is retained after power down and included in stored settings.

 To change the name of an output channel, see section 3.2.5 “Changing a name”

5.3.2 Routing Page

Each of the eight DN9848E outputs’ matrix can be acquired from any combination of the four A, B, C

and D inputs. For paired outputs, the source inputs are attenuated by 6dB prior to summing and the

ratio of the two signals used is adjustable. When all outputs are combined, the source inputs are

attenuated by 12dB prior to summing in equal proportion. (See HELIX DN9848E manual for Technical

Overview).

 To set the routing for the outputs

1 Press the fader button (shown right) on the DN9848E Units screen; this will

take you to the routing page (below).

2 You can adjust the mix from scratch or load a mix setting from a template.

To adjust the mix using the latter option, see “To load a mix template” on

page 43.

To adjust the mix from scratch, manually set faders A, B, C and D on each

output to suit.

Important!

Delays for the summed channels must be set to the same value.

Contents

Main Page HELIX DN9848E Remote Control Software CONTENTS Page Page HELIX DN9848E Remote Control Software 1 INTRODUCING THE HELIX DN9848E REMOTE CONTROL SOFTWARE HELIX DN9848E Remote Control Software 2 INSTALLING THE HELIX DN9848E RCS ADD-IN 2.1 Minimum System Requirements HELIX DN9848E Remote Control Software 2.2 Software Installation 1 2 HELIX DN9848E Remote Control Software 5 3 GETTING STARTED 3.1 Opening HELIX DN9848E RCS within the ELGAR Library Manager 1 2 1 2 3 1 2 Page 1 2 1 2 3 1 2 3 4 3.3 The HELIX DN9848E RCS Workspace 3.4 Quick Tour of the HELIX DN9848E RCS Menu Screens Page Page Page Page Page Page Page Page 3.5 Working Online 1 2 1 2 3 4 1 2 Page 3.6 Protecting System Settings 1 2 3 4 1 2 3 1 2 3 4 1 2 3 HELIX DN9848E Remote Control Software 4 INPUT CHANNELS 4.1 Input Channel Control Panel Page 4.3 Setting Input Parameters 1 1 2 1 2 1 2 1 2 1 2 4.4 Monitoring the Input Signals Page HELIX DN9848E Remote Control Software 5 OUTPUT CHANNELS 5.1 Output Channel Control Panel Page 5.3 Setting Output Parameters 1 2 1 2 3 Page 1 2 1 2 1 2 3 1 2 3 1 2 3 4 1 2 3 4 1 2 HELIX DN9848E Remote Control Software 1 2 3 1 2 3 4 1 2 3 4 1 6 2 3 4 1 2 3 5.4 Monitoring the Output Signals 5.5 Output Muting on Selected Unit 6 CONFIGURING A HELIX DN9848E UNIT 6.1 General 6.2 Unit and Memory Identification 1 2 6.3 Display Delay Options 1 2 3 6.4 Knob Mouse Direction 4 1 2 6.5 PEQ Bandwidth or Q Selection 1 2 3 HELIX DN9848E Remote Control Software 7 P 7.1 Parametric Equalisation (PEQ) Page 7.3 Filters HELIX DN9848E Remote Control Software 8 WORKING WITH MULTIPLE HELIX ADD-INS 8.1 Building your Network Remotely 8.2 The DN9848 Units Home Screen 1 7 2 3 1 2 3 4 HELIX DN9848E Remote Control Software 9 STORING/RECALLING MEMORY SETTINGS 9.1 Using Working Memories 1 2 3 9.2 Unit (Device) Memories 9.3 Copy RCS Memories 1 2 3 4 5 HELIX DN9848E Remote Control Software 10 MANAGING GROUPS 5 10.1 Security Grouping Password 1 4 2 3 4 1 2 3 10.2 Input Groups 1 2 3 4 5 1 1 2 1 2 3 1 2 3 1 2 3 10.3 Output Groups 1 2 3 4 5 1 1 2 1 2 3 1 2 3 1 2 3 HELIX DN9848E Remote Control Software 11 USING HELIX DN9848E RCS TO CONTROL A PROCESSING SYSTEM 11.1 Overview 11.2 HELIX DN9848E unit interconnections 11.3 Ethernet Connection HELIX DN9848E Remote Control Software 1 2 3 4 5 6 7 8 9 10 Page HELIX DN9848E Remote Control Software A 1 HELIX DN9848E Remote Control Software B 2 3 4 8 9 10 1 2 3 11.4 Serial Connection (Option) 1 2 3 4 5 6 7 8 9 11 12 13 14 15 11.5 The System Configuration Window 1 2 1 2 Page HELIX DN9848E Remote Control Software 12 APPENDICES 12.1 Glossary of Terms and Abbreviations A B R S T 12.2 Remote Control Connection Options Page Page Page 12.3 Setting up the Lantronix UDS1100 Converter 1 2 3 8 9 10 11 12 1 2 3 4 5 6 7 12.4 Mix Templates for Routing Pages Page 12.5 Presets