Kodak 9500 manual Cont

KX/Y/Z — Scan contrast

LX/Y/Z — Dither pattern (screen)

MC — Count Only mode

The KX/Y/Z command defines the contrast used for the current mode.

NOTE: A contrast of 0 results in a fixed threshold.

	Data Field	Command Field
	cont	K	X/Y/Z
Data Field	Description		Value(s)
cont	scan contrast ranging from 0 (fixed		0–100
	thresholding) to 100 (fully adaptive)

NOTES:

•Leading zeros are not permitted.

•If multi-level screening is enabled (LX/Y/Z ≠ 0), this command is used to enable/disable Error Diffusion.

The LX/Y/Z command selects one of the eight screens for the current mode.

	Data Field	Command Field
	screen	L	X/Y/Z
Data Field	Description		Value(s)
screen	2-level screen (no screen)		0
	16-level screen		1
	32-level screen		2
	64-level screen		3
	3-level screen		4
	4-level Bayer Dither		5
	16-level Bayer Dither		6
	64-level Bayer Dither		7

NOTE: Level is defined as the levels of gray simulated by the screen.

The MC command enables or disables Count Only operation. The image address does not change and no images are stored when using Count Only mode.

	Data Field	Command Field
	stat	M	C
Data Field	Description		Value(s)
stat	disables Count Only mode		0
	enables Count Only mode		1

A-61124 March 1999 6-11