Kodak 9500 manual Permanently changing a group of parameters

Permanently changing a group of parameters

A permanent change to a group of parameters is performed by temporarily overriding a group of parameters and then sending a scanner-unique Define Mode (JA) command to save the values to a specified mode.**

The permanent parameter changes remain in effect until a SCSI or power-on reset occurs.

The following table illustrates how the use of a scanner-unique JA command can be used to permanently change a group of current mode parameters:

	RESULT
ACTION	Compression	Resolution
Scanner is in Mode 1	3*	200*
Host executes SCSI Send command	2	300
with 2FX300BX
Host executes SCSI Send command
with 4JA
Host executed SCSI Send command	2	300
with 4HA
Host executes SCSI Send command	3*	200*
with 1HA
Scanner is in Mode 1	3*	200*
Host executes SCSI Send command	2	300
with 2FX300BX4JA
Host executed SCSI Send command	2	300
with 4HA
Host executes SCSI Send command	3*	200*
with 1HA

*Parameter default value.

**The value(s) may be saved to the current mode or any of the other modes.

A-61124 March 1999 6-17