When an error occurs, the host will receive a SCSI Check Condition Status. This indicates to the host that there may be one current error and potentially one or more deferred errors. The host must follow a Check Condition Status with a SCSI Request Sense command. The Sense data will indicate the type of error that has occurred.

To receive subsequent pending errors , the host must execute a SCSI Test Unit Ready command. If a deferred error is pending, the Test Unit Ready command will terminate with a Check Condition Status. The host follows with a SCSI Request Sense command. The combination of Request Sense followed by Test Unit Ready must be repeated until a "good" status is returned on the Test Unit Ready command. A "good" status indicates no errors (current or deferred) are pending.

IMPORTANT: If at any point the host receives a Check Condition for a command and fails to issue a subsequent Request Sense command, the scanner will clear all (current and deferred) Sense data.

Some error conditions disable scanning and cause the document transport to stop. These errors are reported on the scanner control panel. This is done to prevent additional images from entering the image buffer while allowing the host to perform fault recovery activities. To aid in fault recovery, the information bytes of the Request Sense data will contain a Sequential ID Number for the approximate image upon which the error occurred.

NOTE: The scanner cannot determine exactly which images were affected by the error and which images were not.

If an error occurs that disables the scanner, the host can continue to read images from the image buffer without enabling the scanner. However, when the image buffer has been emptied, an error will be generated indicating fault recovery is required. This differentiates between an end-of-job disable and a disable caused by an error. The operator may continue scanning documents after the host enables the scanner.

A-61124 March 1999

2-3

Page 6
Image 6
Kodak 9500 manual March

9500 specifications

The Kodak 9500 is a sophisticated imaging device designed to revolutionize the way professionals engage with photography and imaging technologies. This innovative product combines cutting-edge technology with user-friendly features to enhance the overall shooting experience, making it a top choice among photographers and videographers alike.

One of the standout features of the Kodak 9500 is its high-resolution sensor, which captures images in stunning detail. With a resolution of up to 50 megapixels, this camera allows photographers to produce exceptionally sharp and vibrant photos, making it an ideal choice for commercial photography, fine art, and even landscape photography. The larger pixel size ensures better performance in low-light conditions, allowing for clearer images without the noise that often plagues other cameras.

The Kodak 9500 also boasts an advanced autofocus system. This system employs phase detection technology, ensuring that subjects are locked in focus quickly and accurately, even in dynamic environments. Whether capturing fast-moving wildlife or bustling street scenes, users can rely on the camera's autofocus capabilities to deliver crisp, clear results every time.

Another key feature of the Kodak 9500 is its versatility in terms of shooting modes. The camera offers a wide range of options, including manual, aperture priority, and shutter priority modes. Additionally, the inclusion of various scene modes enables users to achieve optimal results regardless of their level of expertise. This makes the Kodak 9500 accessible to both beginners and seasoned photographers.

In terms of connectivity, the Kodak 9500 incorporates built-in Wi-Fi and Bluetooth technology, allowing for easy sharing of images and videos. Photographers can transfer their work directly to smartphones or tablets and share them on social media platforms without the need for additional software or wires. This seamless connectivity enhances the workflow for professionals who need to present their work quickly.

The build quality of the Kodak 9500 is another aspect worth mentioning. Constructed with a durable magnesium alloy body, the camera is designed to withstand the rigors of professional use. It is also weather-sealed, making it resistant to moisture and dust, allowing photographers to work confidently in various environmental conditions.

In summary, the Kodak 9500 stands out in the crowded camera market with its high-resolution capabilities, advanced autofocus system, versatile shooting modes, and robust connectivity options. Its durable construction makes it a reliable tool for professionals seeking to capture their vision with precision and clarity. Whether you are a seasoned pro or a passionate enthusiast, the Kodak 9500 is an exceptional choice that elevates the art of photography.