Define Window Parameters data
Descriptor | Data |
|
| Definition |
Window Identifier | = SFFFFF00 | S=Side | ||
|
| FFFFF=Mode | ||
Auto | = 0 | Auto windows not supported | ||
X Resolution | = 0 | If zero, will default to 200 dpi | ||
| = 70 to 300 | Document Scanner 9500 | ||
Y Resolution | = | Defaults to X resolution | ||
Upper Left X † | = 0 to 14400* | 0 to 12 inches (0 to 304.8 mm) | ||
Upper Left Y † | = 0 to 24000* | 0 to 20 inches (0 to 508 mm) | ||
Width † | = 0,96 to 14400* | 0 or 0.08 to 12 inches (2 to 304.8 mm) | ||
Length † | = 0,96 to 36000* | 0 or 0.08 to 30 inches (2 to 762 mm) | ||
Brightness | = 0 | Automatic brightness not supported | ||
Threshold | = 0, 1 to 255 | When zero and "Allow Zero for Threshold & | ||
|
| Contrast" is zero, return to default value | ||
Contrast | = 0, 1 to 255 | Percentage of adaptive threshold. When zero, | ||
|
| and "Allow Zero for Threshold & Contrast" is zero, | ||
|
| return to default value | ||
Image Composition | = 00H, 01H | 00H = | ||
|
| 01H = Dithered (see halftone pattern) | ||
Bits per Pixel | = 1 | Only one bit available (8 bits internal) | ||
Halftone Pattern | = 0 to 7** | ATP On: | ||
|
| 0 | = | |
|
| ATP Off: | ||
|
| 1 | = | |
|
| 2 | = | |
|
| 3 | = | |
|
| 4 | = | |
|
| 5= | ||
|
| 6= | ||
|
| 7= | ||
RIF | = 0, 1 | 0 | = zero white, one black | |
|
| 1 | = zero black, one white (default) | |
Padding Type | = 00H | Pad with 0s cannot be disabled | ||
|
|
|
|
|
*Measurement unit for scan region parameters is 1/1200 inch (0.0212 mm).
** Image Composition | Halftone Pattern | Result |
00 | any | Halftone Pattern |
00 | 0 | No dithering (ATP or fixed threshold) |
01 | any | Dither using specified halftone pattern |
01 | 0 | Image Composition |
†If the Digital Science Image Manager is installed and enabled and all four parameters are 0, auto- cropping is selected. If the Digital Science Image Manager is not installed and enabled, 0000 should not be used.
|