Kodak CX6230 Displaying Pictures/Videos on a Television, Running a Continuous Slide Show Loop

Chapter 4

Running a Continuous Slide Show Loop

When you turn on Loop, the slide show is continuously repeated.

1On the Slide Show menu, press to highlight Loop, then press the OK button.

2Highlight On, then press the OK button.

When you start a slide show, it repeats until you cancel it by pressing the OK button or until battery power is exhausted. The Loop setting remains until you change it.

Displaying Pictures/Videos on a Television

You can display pictures and videos on a television, computer monitor, or any device equipped with a video input. (Image quality on a television screen may not be as good as on a computer monitor or when printed.)

NOTE: Make sure the Video Out setting (NTSC or PAL) is correct (page 59).

Audio/video	1 Connect the audio/video cable (included)
cable	from the camera video-out port to the
	television video-in port (yellow) and
	audio-in port (white). (Refer to your
	television user’s guide for details.)
	The camera screen turns off; the
	television screen acts as the camera
	display.

2Review pictures and videos on the television screen.

NOTE: The slide show stops if you connect or disconnect the cable while the slide show is running.

48