Kodak CX6230 manual Chapter, Problem, Cause, Solution, page

Chapter 10

Problem	Cause	Solution
In Review mode,	The camera may not be	Check the picture storage location
you do not see a	accessing the correct	setting (page 12).
picture (or the	storage location.
expected picture)
on the camera
screen.
Picture is too	Flash is not on.	Turn on the flash (page 22).
dark.
	The subject is too far	Move so there is no more than
	away for the flash to	12.8 ft (3.9 m) between the
	have an effect.	camera and the subject.
	The subject is in front	Use Fill flash (page 22) or change
	of a bright light	your position so light is not
	(backlit).	behind the subject.
	Not enough light.	Increase Exposure Compensation
		(page 28).
Picture is too	The flash is not needed.	Change to Auto flash or Flash Off
light.		(page 22).
	The subject was too	Move so there is at least 1.6 ft (0.5
	close for flash.	m) between camera and subject.
	The light sensor is	Hold the camera so your hands or
	covered.	other objects do not cover the
		light sensor.
	Too much light.	Decrease Exposure Compensation
		(page 28).

79