Doing more with your frame
The following types of standard picture frames will not fit on your EASYSHARE Digital Frame.
■Frames that secure a photo by pressing it between two pieces of glass.
■A deep frame that’s designed to hold
■Frames with inserts in which the insert holds the standard picture size.
■Frames with a hinged or otherwise
■Frames with a curved or uneven mounting surface.
■Frames with a round, oval, or other
■Frames in which you slide the picture into one end.*
■Handcrafted frames.*
* You may be able to use these frame types. Check for individual frame compatibility.
General attachment details
1If the faceplate that was packaged with your frame is attached, remove it (see page 9).
2Remove the back, backing material, and the glass from the standard picture frame. Use CAUTION when handling the glass, the edges are sharp.
Store the original faceplate and contents of the standard picture frame in the box that came with your digital frame. Keep for later use.
NOTE: You must remove the glass. The digital frame’s Quick Touch Border will not work with the glass in place.
3Place the standard picture frame face down on a protected flat surface, and place the digital frame into the picture frame.
4Attach the frames together according to the following directions. Keep any leftover foam spacers for later use.
5When attached, make sure the digital frame is secure within the picture frame and can’t shift or move around.
www.kodak.com/go/support | 25 |
