Kodak DC210+ manual $GMXVWLQJWKHSRVXUH9DOXH, Kdqjlqjsrvxuh&Rpshqvdwlrq

To delete the picture that was just taken without leaving Capture mode, perform the fol- lowing steps:

1.Set the mode dial to Capture.

2.Turn on the camera.

3.Take a picture.

The picture is displayed on the LCD.

4.Press the button.

The delete screen appears in the LCD.

NOTE: The picture must be showing on the LCD screen to activate the delete screen.

		button
button		Do-It button
		button
	button

5.Press the or button until the correct delete option is highlighted.

6.Press the Do-It button.

The picture is deleted from the memory card.

To exit, press the or button until NO is highlighted, and then press the Do-It button.

$GMXVWLQJ￿WKH￿([SRVXUH￿9DOXH

The camera’s exposure value (EV) can be adjusted from –2.0 to +2.0 EV in 0.5 increments while in Capture mode. A +1.0 adjustment in EV doubles the amount of light allowed to reach the charge coupled device (CCD) in your camera. A –1.0 adjustment in EV halves the amount of light allowed to reach the CCD in your camera.

If your pictures are too dark, increase (+) the exposure compensation setting. If they are too light, decrease (–) the exposure compensation setting.

&KDQJLQJ￿([SRVXUH￿&RPSHQVDWLRQ

To change exposure compensation, perform the following steps:

1.Set the mode dial to Capture.

2.Turn the camera on.

Taking Pictures 3-3