Kodak DC210+ manual Odvk, 5HVROXWLRQ

)ODVK

The camera is equipped with a built-in flash that offers an optional red-eye reduction fea- ture. The flash has an effective range of approximately 1.6 to 9.8 feet (0.5 to 3 meters). There are five Flash settings:

Auto — Flash fires automatically when the shutter button is pressed and the camera determines that there is not enough light. This is the default setting.

Auto Red-eye — Works the same as Auto except the flash fires once before the picture is taken to reduce the chance of red-eye and then flashes a second time when the picture is taken.

Fill — Flash fires every time you press the shutter button. Use this set- ting when the lighting is poor or when your subject is lit from behind.

Fill Red-eye — Works the same as Fill flash setting except the flash fires once before the picture is taken to reduce the chance of red-eye and then flashes a second time when the picture is taken.

Off — Flash is turned off and does not fire.

To change the Flash setting, perform the following steps:

1.Set the mode dial to Capture.

2.Turn on the camera.

3.Press the flash button to scroll through and select the appropriate Flash settings. Flash returns to its default setting when the camera is turned off.

5HVROXWLRQ

Resolution indicates the size of the picture in pixels. The camera can be set to capture pictures in a high or standard resolution. Your pictures include more detail with high resolu- tion, but they will use more memory on the card than at the standard resolution setting.

Taking Pictures 3-7