11-4
If you remove the antialiasing filter and don’t re-install it, you should store it in a clean,
dust-free space.
3Carefully unscrew the screw at
the bottom of the antialiasing
filter bracket using a jewelers
screwdriver (Phillips #00).
4Carefully remove the filter
bracket from the camera.
5Gently blow off the dust using
commercially available “canned
air.” If the antialiasing filter is
still dirty, please contact your
dealer or service representative.
6To re-install: place the filter
bracket tabs into the upper two
notches on the camera lens
opening, and secure the screw at
the bottom.
7Replace the lens.
Refer to “Mounting the Lens”
on page 1-19.
M
AF