Kodak DX3600 manual Installing the Software, Install the Software

6 Installing the Software

Make sure that you install the software from the KODAK Picture Software CD before you transfer pictures from your camera to the computer.

Install the Software

1Before you begin, close all software applications running on your computer.

2Place the KODAK Picture Software CD into the CD-ROM drive.

3Load the software:

On a WINDOWS-based computer—usually, the first install window automatically appears. If it does not, choose Run from the Start menu and type the drive letter that contains the CD followed by \setup.exe. For example: d:\setup.exe

On a MACINTOSH computer—click Continue on the install window that automatically appears.

4Follow the on-screen instructions to install the software. If prompted, restart the computer when the installation is complete.

To install all applications on the CD, select Typical when prompted.

To choose the applications you wish to install, select Custom when prompted. See page 46 for a description of the applications that are included on the CD.

NOTE: Take a few minutes to electronically register your camera and software when you are prompted to do so. This allows you to receive information regarding software updates, and registers some of the products included with the camera.

You must be connected to your Internet service provider to register electronically.

45