A-61167 September 2002 9
Removing the
Foam Sheet The scanner is packed with a foam sheet inside to protect the rollers dur ing
shipping. This foam sheet must be removed before you can begin sc anning.
1. Lift the scanner out of the box and place it on a stable, level work surface
that is capable of supporting it.
2. Lift up the scanner door release to unlatch the scanner door.
3. Pull up to open the scanner door.
4. Remove the foam sheet.
5. Lower the scanner door and press it down firmly until it latches into place.
Scanner Components

Front

1 Scanner door
2 Gap release lever
3 Scanner door release
4 Paper guides
5 Input tray
6 Input tray extender
7 Front panel
8 Front panel latch
1
4
7 85 6
3
2