Kodak i250, i260 Safety and Regulatory Agency Approvals , Environmental Information

A-61167 September 2002 5
Safety and Regulatory
Agency Approvals The KODAK i200 Series Scanners conform to all applicable national and
international product safety and electronic emission regulatory requir ements.
This includes, but is not limited to, the following:
• Underwriters Laboratories Inc. listing to UL 60950 Third Edition
• Underwriters Laboratories Inc. listing to CAN/CSA C22.2 No. 60950-00
Third Edition
• TUV Rheinland of North America approval to EN60950
• CFR 47 Part 15, Subpart B (FCC Class A)
• Canadian ICES003 Class A
• CE Mark (Europe)
• CISPR22 Class A
• EN55022:98 Class A
• EN55024
• EN61000-3-2
• EN61000-3-3
• C-Tick Mark (Australia)
•VCCI Class A (EMC)
Environmental
Information • The KODAK i200 Series Scanners are designed to meet worldwide
environmental requirements.
• The i200 Series Scanners’ power supply cord jacket and the solder o n the
circuit boards contain lead. Disposal of lead may be regulated due to
environmental considerations. For disposal or recycling information, contact
your local authorities, or in the U.S.A., visit the Electronics Industry Allia nce
web site atwww.eiae.org.
• Based on a review of the available information, disposal of the in k cartridge
would not be regulated under U.S. EPA’s (RCRA), U.S. Clean Water Act
(CWA), or both. However, disposal may be subject to state or local landfill,
incineration, or recycling requirements.
• Guidelines are available for the disposal of consumable items that are
replaced during maintenance or service; follow local regulations or contact
Kodak locally for more information.
• The product packaging is recyclable.
• Parts are designed for reuse or recycling.
• The i200 Series Scanners are Energy Star compliant.