A-61133 March 2003 6-1
6 Troubleshooting

Software advisory

messages This chapter contains information on software-advisory messages that

may occasionally arise while using the Kodak
i7300 Scanner Application
Software. These codes are usually informational messages and often
require no action.
Hardware-related messages can be found in the User’s Guide for the
Kodak i7300 Scanner, A-61404.
Code Error message Corrective Action
A000 Power is on. Machine is ready Informational message.
A002 Threading film Informational message.
A003 Threading complete Informational message.
A004 Searching Informational message.
A005 Searching complete Informational message.
A006 Refiling Informational message.
A007 Refiling complete Informational message.
A010 Search is needed Enter an image address search request.
A011 Input problem Re-enter the information.
A012 Number out of range Enter an appropriate number.
A014 Image address is too large Enter an appropriate image address.
A016 Image not found Try again.
Check the film reel to be sure the film is loaded correctly
into the magazine.
A018 End of chapter Informational message.
A019 End of film Informational message.
A022 Film is not present Insert the roll of film you want to request an image from
into the film nest.
A024 Too few decimals Enter an image address number with the appropriate
(more) amount of decimals.
A025 Too many decimals Enter an image address number with the appropriate
amount (fewer) of decimals.
A036 Refile required Select Refile Film to refile the film.