A-61133 March 2003 D-13
Claims 2-level film, Image
Processing tab template settings The information below includes only the values that are different from
the system default settings. For more information about the Image
Processing tab, see the section entitled “Setting values on the Image
Processing tab” in Chapter 4.
When Duplex Processing is enabled, there are four available Scan Area
settings. Separate image processing parameters can be specified for
each except for Resolution, Scan Output and Film Polarity.
Template specific settings
1. Scan Area: Primary
2. Duplex Processing: Automatic
3. Film Image Quality: Normal Film
Template specific settings
1. Scan Area: Film View
2. Duplex Processing: Automatic
3. Film Image Quality: Normal Film
Template specific settings
1. Scan Area: Front
2. Duplex Processing: Automatic
3. Sharpening: Photo & Text
4. Film Image Quality: Normal Film
Template specific settings
1. Scan Area: Back
2. Duplex Processing: Automatic
3. Sharpening: Text
4. Film Image Quality: Normal Film
Explanation of settings (see the illustration that follows)
1. Scan Area:
• When Primary is selected, the same image processing settings
will be applied to both front and back.
• When Film View is selected, the image processing settings will be
applied in the Select Overscan and Duplex Processing dialog
boxes as well as in the Image pane.
• When Front is selected, the image processing settings are
applicable to the front side image only.
• When Back is selected, the image processing settings are
applicable to the back side image only.
2. Duplex Processing: Duplex Processing must be enabled.