D-18 A-61133 March 2003
Odometer film, Film tab template settings
The information below includes only the values that are different from
the system default settings. For more information about the Film tab,
see the section entitled “Setting values on the Film tab” in Chapter 4.
Template specific settings
1. Film – Reduction: 24.
2. Image Area: User Defined.
3. Auto Scan Length: Enabled.
Explanation of settings (see the illustration that follows)
1. Film – Reduction: The reduction must be 50X.
2. Image Area: Since Auto Scan Length determines only the scan length,
the Image Area setting must be used to determine scan width. A User
Defined image area setting was used. This setting may need to be
modified so that the specified scan width accommodates your specific
needs, i.e., to eliminate the image marks (or other extraneous
information outside the image) for display and processing. Be sure to
specify an area that accommodates varying sized documents, and
allows for potential image location irregularity on the film, to prevent
truncation of any images.
3. Auto Scan Length: allows the software to determine scan length based
upon the distance between image marks.