7-2 A-61133 March 2003
The Image Server dialog box provides the ability to connect to a
dispatcher installed on the local or remote PC. The remote PC name
can be specified. The local PC name is provided automatically. The
Status field will indicate whether a dispatcher is connected or
disconnected. If the Scanner Application Software was connected to
a dispatcher at shutdown, the software will automatically reconnect
upon start-up. If the connection attempt is unsuccessful (e.g., the
PC installed with the dispatcher is not powered up), an error
message will be displayed.
2. Select Local if the dispatcher is installed on the same PC as the
Application Software. Select Remote if the dispatcher is on a
different PC.
3. Select Connect.
To disconnect a dispatcher:
1. Select Navigate>Image Server>Setup… from the main screen.
2. Select Disconnect.
3. Select Close.
To change to a different dispatcher:
1. Enter the dispatcher name in the active field on the Image Server
dialog box.
2. Select Local if the dispatcher is installed on the same PC as the
Application Software. Select Remote if the dispatcher is on a
different PC.
3. Select Connect.