Installing the KODAK CR 7400 Digital Radiography System
10 Installing KODAK OMS Imaging Software
Installing the KODAK CR 7400 Digital Radiography System
To install the KODAK CR 7400 digital radiography system, complete the following in this
order:
•Install the drivers.
•Install the software.
To install the Kodak CR 7400 software, follow these steps:
1. To launch the installation wizard, insert the KODAK OMS Imaging software DVD in the
DVD-ROM drive on your computer. The KODAK OMS Imaging install menu is
displayed.
2. Click Install Kodak CR 7400 Software.
The KODAK CR 7400 System window is displayed, and the automated installation is
immediately launched.
Figure 8 Kodak CR 7400 System Window
3. When the automated installation is complete, click OK when prompted.
Important
For information on
setting up your
system, see the
KODAK CR 7400
Digital Radiography
System Installation
Guide (AT074412).