Manuals / Kodak / Computer Equipment / Projector

Kodak manual Shutdown, Reinserting the Lens, Operation, KODAK CAROUSEL Slide Projector

Models: Slide Projector

1 34

Download 34 pages 63.85 Kb

Page 23

Image 23

Operation

Reinserting the Lens

To reinsert the lens, push the focus knob up and position the lens gear teeth on the lens barrel with the notch on the projector.

Shutdown

To shut down,

•remove and store the tray

•slide the power switch to off

Your projector will remain warm for several minutes.

	KODAK CAROUSEL® Slide Projector	19

Page 23

Image 23

Kodak manual Shutdown, Reinserting the Lens, Operation, KODAK CAROUSEL Slide Projector

Contents

Operating Manual CONSUMER IMAGINGKODAK CAROUSEL Slide Projector Save These Instructions Important Safety InstructionsOperating Manual KODAK CAROUSEL Slide ProjectorPage Contents KODAK CAROUSEL Slide Projector IntroductionIntroduction Congratulations BASE OverviewFRONT RIGHT BACK RIGHTOperation OperationStartup 80-Slide Tray Loading the Slide TrayOperation 140-Slide TrayAdding Your Slides Remove the lock ring by turning it counterclockwise and lifting it off Operationgate index. The tray will drop into position TrayOperation Replace the lock ring by turning it clockwise until it is secureKODAK CAROUSEL Slide Projector press the select bar all the way downOperation align the tray index bar with the gate indexOperation Projecting Your SlidesLens Lamppress and hold down the select bar Forward and Reverse Focus Autofocus Models 4400 and 5600 onlyrotate the tray to the desired slide, and release the select bar OperationOperation Screen Image Timer Models 4400 and 5600 onlyOperation Reading Light Model 5600 only Room Light Outlet Model 5600 onlyOperation Single Slides Selecting Slide Projection LensesA ﬂat-ﬁeld lens works best for Lens Focal Length/ Projector DistanceChoosing a Curved- or Flat-Field Lens OperationKODAK CAROUSEL Slide Projector OperationOperation Editing Your PresentationRemoving the Lock Ring Adding a SlideOperation Clearing a Gate JamOperation Using the Built-In Viewer Model 5600 OnlyRemoving the Lens Opening the ViewerKODAK CAROUSEL Slide Projector ShutdownReinserting the Lens OperationLamp Tips MaintenanceProjection Lamps the lamp module Changing the Projection LampMaintenance Maintenance Cleaning the Condenser, Heat-Absorbing Glass, and Mirrorglass GlassMaintenance Maintenance Reassembling the Lamp ModuleMaintenance Mirrorthe mirror with a soft, lint-free cloth moistened with lens cleaner When your maintenance is complete, push the lamp module back into theCAUSE TroubleshootingPROBLEM KODAK CAROUSEL Slide ProjectorCAUSE TroubleshootingPROBLEM KODAK CAROUSEL Slide ProjectorWarranty service will not be provided without dated proof of purchase WarrantyLimitations Your Rights Under State Law WarrantyProjector, contact the Kodak Information Center at How to Obtain ServiceAssistance Shipping InstructionsKodak, Ektagraphic, and Kodalux are trademarks CONSUMER IMAGINGConsumer Imaging EASTMAN KODAK COMPANY Rochester, New York