Manuals / Kodak / Computer Equipment / Projector

Kodak Slide Projector manual Changing the Projection Lamp, Maintenance, the lamp module

Models: Slide Projector

1 34

Download 34 pages 63.85 Kb

Page 25

Image 25

Maintenance

Changing the Projection Lamp

Slide the power switch to Off and unplug the projector.

Allow the projector and lamp to cool for about 10 minutes. Push the lamp-module release button and remove

the lamp module.

Note: There is an additional safety latch, which reduces the chance of an accident with a loosely inserted lamp module, that may cause some resistance. To release the latch, you may need to apply extra effort when you pull out the module.

Lift up the lamp release clip. Carefully remove the worn lamp from the socket and place it on a heat-resistant surface.

Insert a new lamp into the socket. Push down to tightly seat the replacement lamp.

Relatch the clip in the forward position and push the lamp module all the way back into the projector until it latches.

	KODAK CAROUSEL® Slide Projector	21

Page 25

Image 25

Kodak Slide Projector manual Changing the Projection Lamp, Maintenance, the lamp module

Contents

KODAK CAROUSEL Slide Projector CONSUMER IMAGINGOperating Manual Save These Instructions Important Safety InstructionsOperating Manual KODAK CAROUSEL Slide ProjectorPage Contents Introduction Congratulations IntroductionKODAK CAROUSEL Slide Projector FRONT RIGHT OverviewBACK RIGHT BASEStartup OperationOperation Operation Loading the Slide Tray140-Slide Tray 80-Slide TrayAdding Your Slides Remove the lock ring by turning it counterclockwise and lifting it off OperationOperation TrayReplace the lock ring by turning it clockwise until it is secure gate index. The tray will drop into positionOperation press the select bar all the way downalign the tray index bar with the gate index KODAK CAROUSEL Slide ProjectorLens Projecting Your SlidesLamp Operationrotate the tray to the desired slide, and release the select bar Forward and Reverse Focus Autofocus Models 4400 and 5600 onlyOperation press and hold down the select barOperation Screen Image Timer Models 4400 and 5600 onlyOperation Reading Light Model 5600 only Room Light Outlet Model 5600 onlyOperation Single Slides Selecting Slide Projection LensesChoosing a Curved- or Flat-Field Lens Lens Focal Length/ Projector DistanceOperation A ﬂat-ﬁeld lens works best forKODAK CAROUSEL Slide Projector OperationRemoving the Lock Ring Editing Your PresentationAdding a Slide OperationOperation Clearing a Gate JamRemoving the Lens Using the Built-In Viewer Model 5600 OnlyOpening the Viewer OperationReinserting the Lens ShutdownOperation KODAK CAROUSEL Slide ProjectorProjection Lamps MaintenanceLamp Tips Maintenance Changing the Projection Lampthe lamp module Maintenance Cleaning the Condenser, Heat-Absorbing Glass, and MirrorMaintenance Glassglass Maintenance Reassembling the Lamp Modulethe mirror with a soft, lint-free cloth moistened with lens cleaner MirrorWhen your maintenance is complete, push the lamp module back into the MaintenancePROBLEM TroubleshootingKODAK CAROUSEL Slide Projector CAUSEPROBLEM TroubleshootingKODAK CAROUSEL Slide Projector CAUSELimitations Your Rights Under State Law WarrantyWarranty Warranty service will not be provided without dated proof of purchaseAssistance How to Obtain ServiceShipping Instructions Projector, contact the Kodak Information Center atConsumer Imaging EASTMAN KODAK COMPANY Rochester, New York CONSUMER IMAGINGKodak, Ektagraphic, and Kodalux are trademarks