Manuals / Kodak / Computer Equipment / Projector

Kodak Slide Projector manual Maintenance, Projection Lamps, Lamp Tips

Models: Slide Projector

1 34

Download 34 pages 63.85 Kb

Page 24

Image 24

Maintenance

To ensure a long life and trouble-free operation for your projector:

•Allow the air to flow freely around the projector.

•Do not recirculate warm air.

•Keep the projector dust free.

Your CAROUSEL Projector requires no lubrication; all bearings are self- lubricating.

Projection Lamps	Included: FHS lamp, 70-hour lamp life (medium-brightness)
	Sampling of other lamps:
	EXY (200 hours/less brightness)
	EXR (35 hours/maximum brightness)
	Note: An EXW lamp is not recommended for older models of CAROUSEL
	Projectors. Contact the Kodak Information Center at 1-800-242-2424 in the
	U.S. or 1-800-465-6325 in Canada if you need help identifying your
	particular model.
Lamp Tips	• Projector operation on line voltages above 125 volts greatly
	reduces the lamp life.
	• Unplug the projector before changing the lamp.

20	KODAK CAROUSEL® Slide Projector

Page 24

Image 24

Kodak Slide Projector manual Maintenance, Projection Lamps, Lamp Tips

Contents

CONSUMER IMAGING KODAK CAROUSEL Slide ProjectorOperating Manual Important Safety Instructions Save These InstructionsKODAK CAROUSEL Slide Projector Operating ManualPage Contents Introduction Introduction CongratulationsKODAK CAROUSEL Slide Projector Overview FRONT RIGHTBACK RIGHT BASEOperation StartupOperation Loading the Slide Tray Operation140-Slide Tray 80-Slide TrayOperation Adding Your Slides Remove the lock ring by turning it counterclockwise and lifting it offTray OperationReplace the lock ring by turning it clockwise until it is secure gate index. The tray will drop into positionpress the select bar all the way down Operationalign the tray index bar with the gate index KODAK CAROUSEL Slide ProjectorProjecting Your Slides LensLamp OperationForward and Reverse Focus Autofocus Models 4400 and 5600 only rotate the tray to the desired slide, and release the select barOperation press and hold down the select barScreen Image Timer Models 4400 and 5600 only OperationReading Light Model 5600 only Room Light Outlet Model 5600 only OperationSingle Slides Selecting Slide Projection Lenses OperationLens Focal Length/ Projector Distance Choosing a Curved- or Flat-Field LensOperation A ﬂat-ﬁeld lens works best forOperation KODAK CAROUSEL Slide ProjectorEditing Your Presentation Removing the Lock RingAdding a Slide OperationClearing a Gate Jam OperationUsing the Built-In Viewer Model 5600 Only Removing the LensOpening the Viewer OperationShutdown Reinserting the LensOperation KODAK CAROUSEL Slide ProjectorMaintenance Projection LampsLamp Tips Changing the Projection Lamp Maintenancethe lamp module Cleaning the Condenser, Heat-Absorbing Glass, and Mirror MaintenanceGlass Maintenanceglass Reassembling the Lamp Module MaintenanceMirror the mirror with a soft, lint-free cloth moistened with lens cleanerWhen your maintenance is complete, push the lamp module back into the MaintenanceTroubleshooting PROBLEMKODAK CAROUSEL Slide Projector CAUSETroubleshooting PROBLEMKODAK CAROUSEL Slide Projector CAUSEWarranty Limitations Your Rights Under State LawWarranty Warranty service will not be provided without dated proof of purchaseHow to Obtain Service AssistanceShipping Instructions Projector, contact the Kodak Information Center atCONSUMER IMAGING Consumer Imaging EASTMAN KODAK COMPANY Rochester, New YorkKodak, Ektagraphic, and Kodalux are trademarks