Manuals / Kodak / Computer Equipment / Projector

Kodak Slide Projector manual press the select bar all the way down, Operation

Models: Slide Projector

1 34

Download 34 pages 63.85 Kb

Page 12

Image 12

Operation

Removing the Tray To remove the slide tray:

•press the select bar all the way down

•align the tray index bar with the gate index.

You can then lift off the tray.

8	KODAK CAROUSEL® Slide Projector

Page 12

Image 12

Kodak Slide Projector manual press the select bar all the way down, Operation, align the tray index bar with the gate index

Contents

CONSUMER IMAGING KODAK CAROUSEL Slide ProjectorOperating Manual Important Safety Instructions Save These InstructionsKODAK CAROUSEL Slide Projector Operating ManualPage Contents Introduction Introduction CongratulationsKODAK CAROUSEL Slide Projector Overview FRONT RIGHTBACK RIGHT BASEOperation StartupOperation Loading the Slide Tray Operation140-Slide Tray 80-Slide TrayOperation Adding Your Slides Remove the lock ring by turning it counterclockwise and lifting it offTray OperationReplace the lock ring by turning it clockwise until it is secure gate index. The tray will drop into positionpress the select bar all the way down Operationalign the tray index bar with the gate index KODAK CAROUSEL Slide ProjectorProjecting Your Slides LensLamp OperationForward and Reverse Focus Autofocus Models 4400 and 5600 only rotate the tray to the desired slide, and release the select barOperation press and hold down the select barScreen Image Timer Models 4400 and 5600 only OperationReading Light Model 5600 only Room Light Outlet Model 5600 only OperationSingle Slides Selecting Slide Projection Lenses OperationLens Focal Length/ Projector Distance Choosing a Curved- or Flat-Field LensOperation A ﬂat-ﬁeld lens works best forOperation KODAK CAROUSEL Slide ProjectorEditing Your Presentation Removing the Lock RingAdding a Slide OperationClearing a Gate Jam OperationUsing the Built-In Viewer Model 5600 Only Removing the LensOpening the Viewer OperationShutdown Reinserting the LensOperation KODAK CAROUSEL Slide ProjectorMaintenance Projection LampsLamp Tips Changing the Projection Lamp Maintenancethe lamp module Cleaning the Condenser, Heat-Absorbing Glass, and Mirror MaintenanceGlass Maintenanceglass Reassembling the Lamp Module MaintenanceMirror the mirror with a soft, lint-free cloth moistened with lens cleanerWhen your maintenance is complete, push the lamp module back into the MaintenanceTroubleshooting PROBLEMKODAK CAROUSEL Slide Projector CAUSETroubleshooting PROBLEMKODAK CAROUSEL Slide Projector CAUSEWarranty Limitations Your Rights Under State LawWarranty Warranty service will not be provided without dated proof of purchaseHow to Obtain Service AssistanceShipping Instructions Projector, contact the Kodak Information Center atCONSUMER IMAGING Consumer Imaging EASTMAN KODAK COMPANY Rochester, New YorkKodak, Ektagraphic, and Kodalux are trademarks