Manuals / Kodak / Computer Equipment / Projector

Kodak Slide Projector manual Cleaning the Condenser, Heat-Absorbing Glass, and Mirror, Maintenance

Models: Slide Projector

1 34

Download 34 pages 63.85 Kb

Page 26

Image 26

Maintenance

Cleaning the Condenser, Heat-Absorbing Glass, and Mirror

To clean the condenser, heat-absorbing glass, or mirror, you must disassemble the lamp module.

Slide the power switch to Off and unplug the projector. Allow the projector to cool about 10 minutes. Push the lamp-module release button and remove the lamp module.

Use a torx-head screwdriver to remove the screw.

Using a flat-blade screwdriver, apply ample pressure to release each of the metal tabs.

Lift off the top of the lamp module.

22	KODAK CAROUSEL® Slide Projector

Page 26

Image 26

Kodak Slide Projector manual Cleaning the Condenser, Heat-Absorbing Glass, and Mirror, Maintenance

Contents

Operating Manual CONSUMER IMAGINGKODAK CAROUSEL Slide Projector Important Safety Instructions Save These InstructionsKODAK CAROUSEL Slide Projector Operating ManualPage Contents KODAK CAROUSEL Slide Projector IntroductionIntroduction Congratulations BACK RIGHT OverviewFRONT RIGHT BASEOperation OperationStartup 140-Slide Tray Loading the Slide TrayOperation 80-Slide TrayOperation Adding Your Slides Remove the lock ring by turning it counterclockwise and lifting it offReplace the lock ring by turning it clockwise until it is secure TrayOperation gate index. The tray will drop into positionalign the tray index bar with the gate index press the select bar all the way downOperation KODAK CAROUSEL Slide ProjectorLamp Projecting Your SlidesLens OperationOperation Forward and Reverse Focus Autofocus Models 4400 and 5600 onlyrotate the tray to the desired slide, and release the select bar press and hold down the select barScreen Image Timer Models 4400 and 5600 only OperationReading Light Model 5600 only Room Light Outlet Model 5600 only OperationSingle Slides Selecting Slide Projection Lenses OperationOperation Lens Focal Length/ Projector DistanceChoosing a Curved- or Flat-Field Lens A ﬂat-ﬁeld lens works best forOperation KODAK CAROUSEL Slide ProjectorAdding a Slide Editing Your PresentationRemoving the Lock Ring OperationClearing a Gate Jam OperationOpening the Viewer Using the Built-In Viewer Model 5600 OnlyRemoving the Lens OperationOperation ShutdownReinserting the Lens KODAK CAROUSEL Slide ProjectorLamp Tips MaintenanceProjection Lamps the lamp module Changing the Projection LampMaintenance Cleaning the Condenser, Heat-Absorbing Glass, and Mirror Maintenanceglass GlassMaintenance Reassembling the Lamp Module MaintenanceWhen your maintenance is complete, push the lamp module back into the Mirrorthe mirror with a soft, lint-free cloth moistened with lens cleaner MaintenanceKODAK CAROUSEL Slide Projector TroubleshootingPROBLEM CAUSEKODAK CAROUSEL Slide Projector TroubleshootingPROBLEM CAUSEWarranty WarrantyLimitations Your Rights Under State Law Warranty service will not be provided without dated proof of purchaseShipping Instructions How to Obtain ServiceAssistance Projector, contact the Kodak Information Center atKodak, Ektagraphic, and Kodalux are trademarks CONSUMER IMAGINGConsumer Imaging EASTMAN KODAK COMPANY Rochester, New York